- Andheri East, Mumbai, Maharashtra
- GST NO. : 27AATPB6311L1ZI
- +91-9930218498
Lamination Granules
Leading Exporters, Wholesaler and Importer of 1070LA17 Reliance LDPE Lamination Extrusion Coating Granules, Natural DOW 722 LDPE Granuels, Natural SABIC 7019EC LDPE Lamination Grade Granules and White 955 Hanwha LDPE Granuels from Mumbai.
| Business Type | Exporter, Supplier, Importer |
| Material | Plastic |
| Texture | Highly Soft |
| Color | Natural White |
| Application | Industrial Use |
| Plastic Type | LDPE |
| Country of Origin | India |
Preferred Buyer From
| Location | Worldwide |
1070LA17 is an extrusion coating grade Low density Polyethylene (LDPE) produced by high pressure autoclave process. This grade is specially developed for extrusion coating on different substrates and contains no additives. It exhibits excellent drawdown characteristics maintaining good adhesion, with very low neck-in even at high line speeds. It can also be easily processed into thin gauge films for adhesive lamination and heat and pressure lamination.
APPLICATIONS
Extrusion coating, heat & pressure lamination film.
Typical Process Conditions:
Typical Process Temp (°C) - 200 – 320
Regulatory Information
- Meets the requirements stipulated in standard IS: I0146 on "Specification for Polyethylene for safe use in contact with foodstuffs, pharmaceuticals, and drinking water". It also conforms to IS 16738:2018 “Positive List of Constituents for Polypropylene, Polyethylene and their Copolymers for its Safe Use in Contact with Foodstuffs and Pharmaceuticals”
- The grade and the additives incorporated in it also comply with the FDA: CFR Title 21,177.1520, Olefin polymers.
- 1070LA17 is not intended for use in medical and pharmaceutical applications
Storage Recommendations
Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight.
| Business Type | Exporter, Supplier, Importer |
| Material | Low Density |
| Color | White |
| Feature | Easy To Carry, Good Quality, Light Weight |
| Type | Low Density Polyethylene |
| Country of Origin | India |
| Pattern | Plain |
Preferred Buyer From
| Location | Worldwide |
| Business Type | Exporter, Supplier, Importer |
| Material | Plastic |
| Condition | Reprocessed |
| Form | Granuels |
| Country of Origin | India |
| Application | Extrusion Coating |
| Quality | Optimum |
Preferred Buyer From
| Location | Worldwide |
DESCRIPTION
7019EC is a Low Density Polyethylene resin produced using Autoclave technology. 7019EC is designed for high speed extrusion coating application. 7019EC contains no additives such as slip agent or anti-blocking agents.
TYPICAL APPLICATIONS
Extrusion Coating
PROCESSING CONDITIONS
Typical processing temperature: 300 - 340 ºC.
STORAGE AND HANDLING
Polyethylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product performance. It is advisable to process PE resin within 6 months after delivery.
| Business Type | Exporter, Supplier, Importer |
| Material | Low Density |
| Color | Transparent |
| Type | Low Density Polyethylene |
| Country of Origin | India |
| Material Type | LDPE |
Preferred Buyer From
| Location | Worldwide |
DESCRIPTION
HANWHA Polyethylene 955 is a Low Density Polyethylene extrusion coating grade offering :
- EXCELLENT DRAWABILITY
- VERY LOW NECK-IN
- EXCELLENT HEAT SEALABILITY
TYPICAL APPLICATION
- General extrusion coating, extrusion lamination, coextrusion coating
- Application in packaging as well as in industrial performance structures where heat sealability is of prime importance and required a low neck-in.
- Coating on different substrates like kraft, board and paper, aluminum foil, flexible films, nonwovens, etc.
