Natural Non Slip FT6230 Borouge Granule

DESCRIPTION

FT6230 is a Low Density Polyethylene for Film extrusion produced by high pressure Tubular Technology. This grade is developed for the production of packaging film with good optical properties. FT6230 contains no additives.

PROCESSING GUIDELINES

FT6230 can be processed easily on most types of blown film equipment such as LDPE, LLDPE or HDPE extruders

Recommended processing conditions:

Melt temperature 160 –190°C

Die gap > 1.0 mm

FLH: > 2 DD

BUR: > 2:1

FOOD CONTACT REGULATIONS

FT6230 fulfils the food contact regulations in most countries. If required, contact your Borouge representative for a certificate.

STORAGE

The product should be stored in dry conditions at temperatures below 50°C and protected from UV-light. Improper storage can initiate degradation, which results in odour generation and colour changes and can have negative effects on the physical properties of this product.

More information on storage can be found in Safety Information Sheet for this product

SAFETY

The product is not classified as a hazardous mixture.

Dust and fines from the product carry a risk of dust explosion. All equipment should be properly earthed. Inhalation of dust should be avoided as it may cause irritation of the respiratory system. Small amounts of fumes are generated during processing of the product. Proper ventilation is therefore required

A Safety Information Sheet is available on request. Please contact your Borouge representative for more details on various aspects of safety, recovery and disposal of the product.

RECYCLING

The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.