BOROUGE FB1200 LLDPE Granuels

DESCRIPTION

Borstar®FB1200 is produced using the proprietary Borstar® bimodal technology resulting in easy extrusion with superior mechanical properties. Film made from the product exhibits excellent mechanical strength at normal as well as low temperature, good sealing properties and superior ESCR. Borstar®FB1200 contains antioxidant.

CAS-No. 25087-34-7

APPLICATIONS

• Impact modifier
• Grape Cover Films
• Greenhouse Films
• Monolayer & co-extrusion films
• Aquaculture and Pond Liners
• Soft Geomembrane
• Heavy Duty and Wide Width Film
• Mulch Film
• Compression Packaging
• Industrial Film
• Silage Film
• KEY

KEY FEATURES

• Easy process ability
• Excellent draw down
• Excellent impact strength – stiffness balance
• Toughness at low temperature
• Good seal properties
• Superior ESCR
• Bubble stability

PROCESSING CONDITIONS

Borstar®FB1200 can be processed in most types of blown film equipment such as LDPE, LLDPE or HDPE extruders. The balance of draw down properties and bubble stability is superior to conventional LLDPE and LDPE. Thickness of 10 to >2000mm can be processed with good bubble stability. The product is well suited for co-extrusion.

Recommended extrusion temperature is 190 - 210°C. A die gap of 1.0 - 1.8 mm will give the best balance between extruder pressure and physical properties in the film. Wider die gap gives higher machine direction orientation.

Borstar®FB1200 provides excellent mechanical properties balance by optimizing film processing parameters like Blow up ratio (BUR) and Frost Line Height (FLH). Higher impact strength can be achieved by raising the FLH. High BUR (>2) also results in improved mechanical properties.

FOOD CONTACT REGULATIONS

Borstar®FB1200 fulfils the food contact regulations in most countries. If required, contact your Borouge representative for a certificate

STORAGE

This product should be stored in dry conditions at temperature bellow 50°C and protected from UV-light. Improper storage can initiate degradation, which results in odour generation and colour changes and can have negative effects on physical properties of this product. More information on storage can be found in Safety Information Sheet (SIS) for this product.