Natural LDPE LOTRENE FD0270 Granule

DESCRIPTION

Lotrène® FD0270 is an additive free grade mainly recommended for the extrusion of thin film for light and medium duty applications.

PROPERTIES

The molecular structure of Lotrène® FD0270 makes it possible to produce very thin, clear and glossy films.

PROCESSING

• Lotrène® FD0270 can be easily processed on all types of extruders to make blown or cast films.
• The melt temperature is suggested to be in the range of 140-150 °C.
• The best properties of the blown film are achieved at blow up ratios between 2:1 and 3:1.
• The recommended thickness range is from 20 μm to 100 μm

APPLICATIONS

• High clarity bags

• Thin shrink film

• Lamination film

• Foamed products

HANDLING & STORAGE

Polyethylene products should be stored in their original packaging or in clean appropriate silos. The products should be stored in a dry and well-ventilated area and should not be exposed to direct sunlight and/ or heat in any form since this may adversely affect their properties. As a general rule, our products should not be stored for more than three months from receipt date.

SAFETY

Under normal conditions Lotrène® products do not present a toxic hazard through skin contact or inhalation. For detailed information please refer to the Safety Data Sheet.

FOOD CONTACT & REACH

Lotrène® polyethylene products manufactured by Qatar Petrochemical Company (QAPCO) Q.S.C. comply with US, EU and other food contact legislations. Limitations may apply. All QAPCO Lotrène products are complying with REACH Regulation 1907/2006/EC. The aims of this regulation are to improve the protection of human health and the environment through better and earlier identification of the intrinsic properties of chemical substances. Please contact your Muntajat representative for detailed compliance certificates. NOT SUITABLE FOR PHARMACEUTICAL OR MEDICAL APPLICATIONS