- Andheri East, Mumbai, Maharashtra
- GST NO. : 27AATPB6311L1ZI
- +91-9930218498
Moulds Granules
Leading Exporters, Wholesaler and Importer of Natural MG70 LDPE Granules and White Relene 16MA400 LDPE Granule from Mumbai.
| Business Type | Exporter, Supplier, Importer |
| Material | Plastic |
| Texture | Highly Soft |
| Color | Natural White |
| Application | Industrial Use |
| Transparency | Clear |
| Country of Origin | India |
Preferred Buyer From
| Location | Worldwide |
DESCRIPTION
Lotrène® MG70 is an injection moulding grade mainly recommended for the injection of thin and flexible items and the preparation of masterbatches.
PROPERTIES
The high melt flow index of Lotrène® MG70 leads to excellent flowability and processability. The items produced from this grade possess high flexibility and glossy surface.
PROCESSING
Lotrène® MG70 can be processed on all types of injection moulding machines. The temperatures and pressures used for the processing of Lotrène® MG70 are normal for the injection of lowdensity polyethylene of high melt flow index. The melt temperature range suggested is between 150 °C and 170 °C. However, optimum conditions are dependant on the equipment used (presses, moulds, etc.) and the articles under production (appearance, size, shape, etc.).
APPLICATIONS
• Artificial flowers
• Metal coating
• Coating of textiles
• Masterbatches
HANDLING & STORAGE
Polyethylene products should be stored in their original packaging or in clean appropriate silos. The products should be stored in a dry and well-ventilated area and should not be exposed to direct sunlight and/ or heat in any form since this may adversely affect their properties. As a general rule, our products should not be stored for more than three months from receipt date.
SAFETY
Under normal conditions Lotrène® products do not present a toxic hazard through skin contact or inhalation. For detailed information please refer to the Safety Data Sheet.
FOOD CONTACT & REACH
Lotrène® polyethylene products manufactured by Qatar Petrochemical Company (QAPCO) Q.S.C. comply with US, EU and other food contact legislations. Limitations may apply. Please contact your Muntajat representative for detailed compliance certificates.
All QAPCO Lotrène products are complying with REACH Regulation 1907/2006/EC. The aims of this regulation are to improve the protection of human health and the environment through better and earlier identification of the intrinsic properties of chemical substances.
NOT SUITABLE FOR PHARMACEUTICAL OR MEDICAL APPLICATIONS
Lotrè€ne® products are not suitable for pharmaceutical or medical applications
| Business Type | Exporter, Supplier, Importer |
| Material | Plastic |
| Texture | Highly Soft |
| Color | Natural White |
| Application | Industrial Use |
| Plastic Type | LDPE |
| Transparency | Clear |
| Country of Origin | India |
Preferred Buyer From
| Location | Worldwide |
16MA400 is an injection molding grade with high melt flow index for molding of very thin, intricate and large items having adequate mechanical properties. This grade is also an ideal choice for making master batches with higher loading.
APPLICATIONS:
Master batches, powder coating & moldings.
Regulatory Information
Meets the requirement stipulated in standard IS: 10146 on “Specification for Polyethylene for safe use in contact with foodstuff, pharmaceutical, and drinking water”. It also conforms to the positive list of constituents as prescribed in IS: 10141. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177,1520, Olefin polymers.
Storage Recommendations
Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight.
