- Andheri East, Mumbai, Maharashtra
- GST NO. : 27AATPB6311L1ZI
- +91-9930218498
Twitter5000 Kilogram (MOQ)
| Business Type | Exporter, Supplier, Importer |
| Material | PPCP |
| Color | White |
| Form | Granules |
| Click to view more | |
Preferred Buyer From
| Location | Worldwide |
Product Details
DESCRIPTION
BJ368MO is a heterophasic copolymer characterized by very high flow, and optimum combination of high stiffness and impact strength.
The material is nucleated with Borstar Nucleation Technology (BNT). Flow properties, nucleation and good stiffness give potential for cycle time reduction.
The material has both good antistatic performance and mould release properties\
APPLICATIONS
- Thin wall containers
- Food packaging
- Small size ice cream containers
SPECIAL FEATURES
- Very good stiffness and impact balance
- Good flow behaviour
- Reduced cycle time and increased output
PROCESSING CONDITIONS
BJ368MO is easy to process with standard injection moulding machines.
Following parameters should be used as guidelines:
Melt temperature: 210 - 260°C
Holding pressure: 200 - 500bar As required to avoid sink marks
Mould temperature: 10 - 30°C
Injection speed: As high as possible
Shrinkage 1 - 2%, depending on wall thickness and moulding parameters
STORAGE
BJ368MO should be stored in dry conditions at temperatures below 50°C and protected from UV-light. Improper storage can initiate degradation, which results in odour generation and colour changes and can have negative effects on the physical properties of this product.
SAFETY
The product is not classified as a hazardous preparation. Please see our Safety Information Sheet (SIS) for details on various aspects of safety, recovery and disposal of the product, for more information contact your Borouge representative.
RECYCLING
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
Specification
