HMEL R0536L LLDPE Roto Molding Granuels

Product Characteristics:

Polysure R0536L is a 1-butene comonomer based Linear Low Density Polyethylene, produced by Gas Phase – UNIPOLTM PE technology and primarily suitable for Roto molding process. R0536L offers low sintering time, good ESCR and very good stiffness-impact balance. It is recommended to incorporate optimum level of Carbon black or long-term UV stabilizer during processing of R0536L for withstanding continuous outdoor exposer.

Recommended Applications:

Water Storage Tank, Loft Tank, Waste Bin, Slides, Toys, Furniture, Chemical Tank, Tank for Agriculture, Roadblock, Multilayer Foam Tank, Milk Can, Septic Tank, Boats, Vending Machine

Processing Guidelines:

Processing Temperature : 220 - 280°C

Storage & Handling:

Bags should be stored in dry & dust free environment at temperature below 50°C and Prevent from direct exposure to sunlight & heat to avoid quality deterioration.

Regulatory Requirements:

R0536L to be manufactured complying the requirements specified in IS 10146 on “Specification for Polyethylene for its safe in contact with Foodstuff, Pharmaceutical & Drinking water”. Furthermore, the Additives added in this grade formulation compiles to the “Positive list of constituents for Polypropylene, Polyethylene and their Copolymers for its safe use in contact with Foodstuffs & Pharmaceuticals' as laid down under IS 16738:2018. In general, the additives & constituents used in the grade are in line with requirement laid down under FDA: CFR Title 21,177.1520, Olefin Polymers.