- Andheri East, Mumbai, Maharashtra
- GST NO. : 27AATPB6311L1ZI
- +91-9930218498
Twitter| Business Type | Exporter, Supplier, Importer |
| Application | Industrial |
| Type | Polypropylene Granules |
| Country of Origin | India |
| Click to view more | |
Preferred Buyer From
| Location | Worldwide |
Product Details
Description
Luban polypropylene is manufactured using Novolen vertical stirred Gas-phase polymerization process. Luban HP4128N is a homopolymer polypropylene with superior slip and anti-blocking properties.
Application
Tubular quench (TQPP) and Cast film, flexible packaging including textiles over raps, garment bags, snack food packaging and straws.
Processing Guidlines
L/D ratio 24.1 – 30.1
Compression ratio 3.1 – 4.1
Melt Temperature 200 – 250 ° C
Pellets Drying Not essential but helps in insuring consistent feed to extruder
Storage and Handling
Luban HP4128N must be protected from direct sunlight and should be stored in a shaded and completely dry area. During handling and processing, the material should be kept in a well-ventilated area to prevent the accumulation of dust and fumes. Contact with strong oxidizers, excessive heat, sparks or open flame should be avoided as this could initiate the degradation process and consequently impact the quality of the material.
Safety
Luban HP4128N is not classified as dangerous preparation. For further information about safety in handling and processing please refer to the Safety Data Sheet.
Food Contact
Luban HP4128N meets the requirements of the U.S. Food and Drug Administration (FDA) as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the “Product Stewardship Declaration
Recycling
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
