- Andheri East, Mumbai, Maharashtra
- GST NO. : 27AATPB6311L1ZI
- +91-9930218498
TQ Granules
Leading Exporters, Wholesaler and Importer of Natural LUBAN PP HP4128N Polypropylene Granuels and White Natural SABIC PP 520L Granules from Mumbai.
| Business Type | Exporter, Supplier, Importer |
| Application | Industrial |
| Type | Polypropylene Granules |
| Country of Origin | India |
| Packing Material | Packed in Plastic Bags |
Preferred Buyer From
| Location | Worldwide |
Description
Luban polypropylene is manufactured using Novolen vertical stirred Gas-phase polymerization process. Luban HP4128N is a homopolymer polypropylene with superior slip and anti-blocking properties.
Application
Tubular quench (TQPP) and Cast film, flexible packaging including textiles over raps, garment bags, snack food packaging and straws.
Processing Guidlines
L/D ratio 24.1 – 30.1
Compression ratio 3.1 – 4.1
Melt Temperature 200 – 250 ° C
Pellets Drying Not essential but helps in insuring consistent feed to extruder
Storage and Handling
Luban HP4128N must be protected from direct sunlight and should be stored in a shaded and completely dry area. During handling and processing, the material should be kept in a well-ventilated area to prevent the accumulation of dust and fumes. Contact with strong oxidizers, excessive heat, sparks or open flame should be avoided as this could initiate the degradation process and consequently impact the quality of the material.
Safety
Luban HP4128N is not classified as dangerous preparation. For further information about safety in handling and processing please refer to the Safety Data Sheet.
Food Contact
Luban HP4128N meets the requirements of the U.S. Food and Drug Administration (FDA) as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. For additional information on approved conditions of use for food contact applications, please refer to the “Product Stewardship Declaration
Recycling
The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling.
| Business Type | Exporter, Supplier, Importer |
| Color | White |
| Form | Granules |
| Feature | Recyclable, Reprocessed |
| Type | Polypropylene Granules |
| Country of Origin | India |
Preferred Buyer From
| Location | Worldwide |
DESCRIPTION
SABIC PP 520L is specially developed for tubular water quenched blown film applications with suitable dosage of slip and antiblock additives. Films produced using SABIC PP 520L has the following features: Consistent processability; High melt strength; Good optical properties; Excellent runability on bagging and sealing machines.
TYPICAL APPLICATIONS
SABIC® PP 520L can be used for producing garment packaging, textiles packaging, magazine covers and for food packaging.
PROCESSING CONDITIONS
- Typical processing conditions for PP520L are:
- Average extrusion temperature range may be kept at 205 - 215°C.
HEALTH, SAFETY AND FOOD CONTACT REGULATIONS
Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com. For additional specific nformation please contact SABIC local representative.
STORAGE AND HANDLING
Polypropylene resin should be stored in a manner to prevent a direct exposure to sunlight and/or heat. The storage area should also be dry and preferably do not exceed 50°C. SABIC would not give warranty to bad storage conditions which may lead to quality deterioration such as color change, bad smel and inadequate product performance. It is advisable to process PP resin within 6 months after delivery
